Page 24-5 Download PDF
Home Online Catalog Products Tools and Resources Help

Square D > On-line Catalog > Products > Terminal Blocks > NEMA Style Terminal Blocks: Type G	Search

Digest 174 Quick Page Locator Enter a page number from our paper catalog to go directly to that page in our online catalog. Example: 5 - 3

Section - Page -

NEMA Style Terminal Blocks

Type G

Class 9080 / Refer to Catalog 9080CT9601

Standard Terminal Block Assemblies

The assemblies listed in the table below consist of 6 ft (two 3 ft lengths packaged together) of terminal blocks. The terminal blocks are mounted on snap-off mounting track, which can be easily broken every 5/16 in. Every tenth terminal block is marked to aid in counting off the proper number of terminal blocks. After adding the proper end barrier and a slip-in end clamp to the blocks that were broken off, the custom assembly is ready for installation.

 

Table 24.4:

Standard Terminal Block Assemblies

Description	Type	$ Price
Assembly of 188 Type GA6	GA6188BC	353.00
Assembly of 204 Type GR6	GR6204BC	449.00
Assembly of 166 Type GC6	GC6166BC	692.00
Assembly of  94 Type GF6	GF694BC	874.00
Assembly of 296 Type GM6	GM6296BC	553.00
Assembly of 188 Type GP6	GP6188BC	435.00

Custom Terminal Block Assemblies

Order an assembly built as required for the application. As standard, custom assemblies use 9080GH mounting track with screw on end clamps. Other options are available from the table below.

One terminal block type: The number of blocks in the assembly is added to the end of the catalog number of the desired block. Example: an assembly of 25 9080GR6 blocks would be 9080GR625.

More than one terminal block type in an assembly: A detailed drawing or sketch of the desired assembly must accompany the order.

 

Table 24.5:

Custom Assembly Pricing

Block Type	$ Price Per Block/ Terminal	Block Type	$ Price Per Block/ Terminal
GA6	1.20	GK6 channel mounted	2.20
GC6	3.30	GK6 direct mounted	1.80
GCB0115	45.30	GM6	1.90
GCB20150	55.90	GP6	2.30
GD6	6.70	GR6	2.20
GE6	18.00	GR6T	2.50
GF6	7.80	GS6	2.50
GG6	8.10	Blank vinyl marking strip	0.03
		Pre-numbered (1-25 only)	0.16

 

 

 

Table 24.6:

Custom Terminal Block Assemblies

Option	Suffix	Example
Substitute slip-in end clamps	C	9080GR625C
Substitute snap-off channel	B	9080GR625BC a
For direct mount assembly of 9080GK6 blocks	D	9080GK67D
Add a blank vinyl marking strip	M	9080GR625M
Add pre-marked (1–25 only) marking strip	MPO	9080GR625MPO
Mount on 35 mm DIN 3 track instead of 9080GH track	T	9080GR625T

a	The 9080GH10 screw-on end clamp is not recommended for use with snap-off channel. It is recommended that the 9080GH11 slip-in end clamp be used. Therefore, when the suffix B is used, it should be followed by the suffix C.

 

 

	$ Price per block from Table 24.5
	Number of blocks in the assembly  x
	Subtotal (multiply # of blocks by price of blocks)
	Initial Charge for factory assemblies
	All except 9080GK6 direct mount ($4.70)
	OR for 9080GK6 direct mount ($2.40)
	Vinyl Marking Strips
	Adder for Suffix M—$0.03 per block
	OR adder for Suffix MPO—$0.16 per block
	Deduct for Suffix C—$1.60
	Total everything from Subtotal down
	Apply the following rounding rules to the total obtained:
	$1.00 through $50.00		Round to the nearest dime
	over $50.00		Round to the nearest dollar

 

Table 24.7:

How to Order

To Order Specify	Catalog Number
▪ Class Number ▪ Type Number	Class	Type
	9080	GA612

 

CP5

Discount Schedule

Modified 9/2/08