Page 23-26 Download PDF
Home Online Catalog Products Tools and Resources Help

Square D > On-line Catalog > Products > Relays and Timers > NEMA Style Industrial Control Relays: Type X Relays	Search

Digest 174 Quick Page Locator Enter a page number from our paper catalog to go directly to that page in our online catalog. Example: 5 - 3

Section - Page -

NEMA Style Industrial Control Relays

Type X® Relays

Class 8501 / Refer to Catalog 8501CT9601

 

Table 23.128:

Type X® Relays

	Description			Type	$ Price
	Mechanical Latch Attachment—Mounts on any 2 through 8-pole relay (except XMO master relay). The Type XL and XDL latch attachments are identical in size and mounting provisions. The Type XLAC latch attachment has a continuous-duty-rated coil which is replaceable. The Type XDLDC latch attachment has an intermittent–rated coil (replaceable) and should be connected through a N.O. contact of the basic relay if the input signal is maintained to the unlatch coil. AC Latch Attachment DC Latch Attachment			XL a XDLa	134.00 176.00
	Pneumatic Timer Attachment—Mounts only on any 0 through 4-pole AC or DC relays (except XMO master relay). It provides 1 N.O. and 1 N.C. convertible timed contacts, which are the same Type XC1 cartridges used on the basic relay. Two timing ranges are available, and conversion from On Delay to Off Delay or vice versa is easy. Off Delay 0.2–60 seconds 5–180 seconds On Delay 0.2–60 seconds 5–180 seconds			XTD1 XTD2   XTE1 XTE2	266.00 266.00   266.00 266.00
	Timer Lockout Cover—Fits over the time delay adjustment knob of any Type XT timing attachment. The Lockout Cover is designed to protect the time setting against accidental adjustment. It mounts directly to the timing attachment with two included screws.			XJ1	7.10
	Adder Decks—Adder decks are used to expand the number of poles on a relay. The basic 4-pole relay can be easily converted to an 8-pole or 12-pole relay by installing one or two adder decks. The Class 8501 Type XB20 comes with 2 convertible contact cartridges and will accept 2 additional convertible contact cartridges. The Class 8501 Type XB40 comes with 4 convertible contact cartridges. The same Type XB adder deck is used for both the middle and upper decks of the AC or DC relay. With 2 N.O. contact cartridges With 4 N.O. contact cartridges			XB20 XB40	38.00 77.00
	Logic Reed Adder Deck—Used for switching low energy circuits. The Logic Reed Adder Deck is supplied with either one or two logic reed cartridges fixed into the center positions of an adder deck. Contact cartridges are neither convertible nor replaceable. Standard cartridges can be inserted in unused cavities of the Logic Reed Adder Deck. One or two Logic Reed Adder Decks may be added to the basic 4-pole relay. See Contact Rating Data on pages 23-5 and 23-6 for electrical ratings.	Number of N.O. Logic Reed	Number of N.C. Logic Reed
		Contact Cartridges	Contact Cartridges
		2	0	XBR20	105.00
		1	1	XBR11	105.00
		1	0	XBR10	52.00
		0	1	XBR01	52.00
		0	2	XBR02	105.00
	Contact Cartridges—The Type X relay offers 4 Types of contact cartridges. All are color–coded for visual identification of each Type.
	Standard Cartridge—The standard cartridge, used for most applications, has a black case.			XC1	19.10
	Overlapping Cartridge—Same NEMA Type A600 AC rating as standard cartridge and a NEMA Type P150 DC rating. When it is used in the N.O. mode it will close early and when used in the N.C. mode it will open late. If two or more are used together, the N.O. contacts will close before the N.C. contacts open as the relay picks up. Overlap also occurs during dropout. Overlapping cartridge has a red case.			XC2	19.10
	May be ordered factory installed: ▪ Substitute 1 N.O. and 1 N.C. overlapping cartridges for 2 standard cartridges. ▪ Substitute 2 N.O. and 2 N.C. overlapping cartridges for 4 standard cartridges. ▪ Substitute 3 N.O. and 3 N.C. overlapping cartridges for 6 standard cartridges. ▪ Substitute 4 N.O. and 4 N.C. overlapping cartridges for 8 standard cartridges.			Form Y1591 Y1592 Y1593 Y1594	Add 19.10 Add 19.10 Add 19.10 Add 19.10
	Master Cartridge—Features the same contact ratings as the Type XC1 standard cartridge except it has a 20 ampere continuous current rating instead of 10 amperes. It can be used in circuits where a master relay is required. Master cartridge has a blue case. Maximum of 6 master cartridges may be used on any 7 and 8-pole AC relays. Do not use any master cartridges on 9-12-pole AC or any DC-operated devices. Note: If master cartridges are added to a standard relay, attachments (latch mechanism, timers, etc.) cannot be used.			XC4	47.60
	Logic Reed Cartridge—See logic reed adder deck above.
	Mounting Track—The mounting track has pre-punched mounting holes to simplify mounting the track on the control panel. The relay mounting screws are factory installed on the track so that the relays can be hung prior to tightening the screws. 9 in. long for 4 relays 18 in. long for 8 relays 27 in. long for 12 relays 36 in. long for 16 relays			XM4 XM8 XM12 XM16	15.60  23.60  28.80  33.90
	Manual Test Tool—Provides a means of manually switching the contacts of a basic relay or timing relay and holding all contacts in their switched state until the tool is removed. This simplifies the checking of control circuits without power on the coil or contacts.			XA1	4.80
	Transient Suppressor—Consists of an R-C circuit designed to suppress coil generated transients to approximately 200 percent of peak voltage. It is particularly useful when switching the Type X relay near solid state equipment. It is designed for use on coils up to 120 Vac.			XS1	38.00
	NEMA 1 Enclosure—Formed from sheet steel to provide strength and rigidity. Two conduit knockouts are located in both the top and bottom of the enclosure. The enclosure is furnished with self tapping screws for mounting the relay inside the enclosure. Accommodates a single 4 or 8-pole AC or DC relay, 12-pole AC relay, 4-pole AC latching relay, and 4-pole AC timing relay. The 4-pole DC latching relay, 4-pole DC timing relay, 8-pole AC and DC latching relays and 12-pole utility auxiliary relay will not fit.			Class 9991 Type UE7	66.00

a	See Mechanical Latch Attachment Voltage Codes table below:

 

Table 23.129:

Mechanical Latch Attachment Voltage Codes

AC Voltage	Code	DC Voltage	Code
24–60 24–50 120–60/110–50 208–60 240–60/220–50 277–60 480–60/440–50 600–60/550–50	V01 V12 V02 V08 V03 V04 V06 V07	6 12 18 24 48 72 90 115/125 230/250	V50 V51 V99 V53 V56 V58 V59 V62 V66

 

 

Table 23.130:

How to Order

To Order Specify:	Catalog Number
▪ Class Number ▪ Type Number ▪ Voltage Code for mechanical latch attachment ▪ Form for factory installed overlapping contacts	Class	Type
	8501	XTE1

 

 

Table 23.131:

Relay Coil Selection and Pricing

Device Type	Equipment To Be Serviced		Coil Prefix, or Class and Type	Hz	SUFFIX (The complete coil number consists of prefix or the Class and Type, followed by suffix.)													Coil Burden Watts	$ Price
	Class	Type			6 V	12 V	18 V	24 V	32 V	48 V	64 V	72 V	90 V	110 V	115/125 V	220 V	230/250 V
DC	8501	XD	9998 XD	—	19	28	34	37	40	46	49	52	55	—	58	—	67	18	122.00
		XDL	9998 XDL	—	19	28	34B	37B	40B	46B	49B	52B	55B	—	58B	—	67B	50	156.00
		XUD	9998 XUD	—	19	28	—	37	—	46	—