Digest 174 Quick Page Locator Enter a page number from our paper catalog to go directly to that page in our online catalog. Example: 5 - 3
Severe Duty, Mill and Foundry Class 9007 Type T and FT, Oiltight Refer to Catalog 9006CT0101 Table 21.31: Lever Arms for Types T and FT Limit Switches or Type C with S9 Modification Description Type $ Price Type of Arm Length of Arm Roller Position Roller Width Roller Dia. (in.) 3/4 1 1-3/8 Straight 1-1/2 Optional 1/4 B1 B2 B3 25.40 1-1/2 Optional 1/2 B12 B13 B14 25.40 2-1/2 Optional 1/4 B7 B8 B9 39.60 2-1/2 Optional 1/2 B22 B23 B24 39.60 2-7/8 None None Without Roller B21 — — 39.60 5 Optional 1/4 B19 — — 30.00 Adj. Optional 1/4 R18b R19b R20b 39.60 Offset 1-1/2 Inside Offset 1/4 C1 C2 C3 26.40 Outside Offset 1/4 D1 D2 D3 39.60 1-7/8 Outside Offset 1/4 E4 E5 E6 25.40 Inside Offset 1/4 F4 F5 F6 25.40 120o Forked 1-1/2 Rollers on Same Side 1/4 J1 J2 — 92.00 Table 21.32: Separate Base Plates 1-1/2 LH Roller on Opp. Side 1/4 K1 K2 — 92.00 Style Mounting Holes Part Number $ Price 1-1/2 RH Roller on Opp. Side 1/4 N1 N2 — 92.00 A Nonea 2934D32G1 15.90 90o Forked 1-1/2 Rollers on Same Side 1/4 X1 X2 — 92.00 B End 2934D14G1 15.90 1-1/2 RH Roller on Opp. Side 1/4 Y1 Y2 — 92.00 C Side 2934D33G1 15.90 1-1/2 LH Roller on Opp. Side 1/4 Z1 Z2 — 92.00 D End 2934D34G1 15.90 Cable Operated 1-1/2 None None Y3 92.00 a No mounting holes in base plate. Side mounting holes in switch case must be used. For all Type T and FT: Acceptable Wire Sizes: 14–18 AWG Recommended Terminal Clamp Torque: 13–16 lb-in Rod Adj. 3/16 in. Rod (not furnished) None R16 54.00 Adj. 1/4 in. Key Stock (not furnished) None R17 54.00 Ball Bearing 1-1/2 Center 9/32 B16 95.00 Weld-On 3-1/2 None None G10 15.90 1-Way Roller 1-1/2 Outside Offset 1/4 D4 131.00 Conveyor Side Guide, 8-7/16 in. long with 1-1/2 in. dia. 3-3/4 in. DELRIN roller. For use with Type T and FT only. R21 102.00 Conveyor Side Guide, 8-7/16 in. long with 7/8 in. dia. 3-3/4 in. DELRIN roller. For use with Type T, FT, or C with S9. R22 102.00 Cable operated—2-1/2 in. long with eyebolt (1/4 in. I.D.) instead of roller. B27 39.60
