Square D > On-line Catalog > Products > Limit Switches > Lever Arms: Type MS/ML Miniature	Search

Digest 174 Quick Page Locator Enter a page number from our paper catalog to go directly to that page in our online catalog. Example: 5 - 3

Section - Page -

Lever Arms

Type MS/ML Miniature

Class 9007 / Refer to Catalog 9006CT0101

 

Description / Functional Diagram	MS	ML	Operating Force/Torque	Contact Form	Contact Type	Catalog a Number b	List Price
Booted top plunger
			80 oz	SPDT Form C	Silver	MS10S0100	130.00
			80 oz	SPDT Form C	Gold	MS10G0100	152.00
			80 oz	SPDT Form Z	Silver	ML10S0100	174.00
Booted parallel roller plunger
			80 oz	SPDT Form C	Silver	MS12S0100	152.00
			80 oz	SPDT Form C	Gold	MS12G0100	164.00
			80 oz	SPDT Form Z	Silver	ML12S0100	194.00
Booted cross roller plunger
			80 oz	SPDT Form C	Silver	MS13S0100	152.00
			80 oz	SPDT Form C	Gold	MS13G0100	238.00
			80 oz	SPDT Form Z	Silver	ML13S0100	194.00

a	See available options below. Add to the end of catalog number. Up to three options may be added, if applicable.

b	See below for conductor length selection.

 

Table 21.27:

For Conductor Length and General Options Selection: 9007MS01S A _ B _

Use this table only for interpreting the catalog number, not for building a catalog number. Some combinations of cable lengths and options are unavailable.

 

A _ Conductor Length a				B _ General Options a
	Designator	$ Price Adder			Designator	$ Price Adder
No cable c	00	—		#16 AWG SJTO cable (MS only)	02	8.60
3 ft—standard	01	—		Side entrance #18 AWG SJTO cable	06	15.40
6 ft	02	8.60		Gray #18 AWG SJTO cable	10	—
9 ft	03	19.60		#18 AWG individual conductors	11	—
12 ft	04	28.40		Male 4 pin mini connector with 3 ft. cable (MS only)	12	83.00
18 ft	05	48.00		Low force (NEMA 1 only)18 oz.	21	6.60
33 ft	13	130.00		High Pre-travel—adds 0.030	30	27.00
c Use with options 54, 55, 82				Male 4 pin micro connector in housing (DC type) (MS only)	54	74.00
				Male 5 pin micro connector (DC type) (ML only)	55	74.00
				Tapped holes in top of plunger housing (MS and ML)	81	—
				Male 4 pin micro connector in housing (AC type) (MS only)	82	74.00
				Black #18 AWG SJTO cable (ML only)	83	—

 

Table 21.28:

Style 7 Levers—.75" (19 mm) diameter, nylon or steel roller

There are over 100 styles of levers to accommodate most of the industrial applications. They are made of zinc diecast. The roller levers are available with nylon rollers as standard and are also available with steel rollers or ball bearing roller (selected models only). Corrosion resistant models are also available.

(9007 prefix is not required on levers catalog numbers)

Length		Catalog Number 1/4" (6 mm) Wide		Catalog Number 1/2" (13 mm) Wide		Catalog Number 3/4" (19 mm) Wide	Catalog Number 1" (25 mm) Wide	List Price
inch	(mm)	Nylon	Steel	Nylon	Steel	Nylon	Nylon
0.875	(22.23)	7A2N	7A2	7B2N	7B2	7F2N	7J2N	19.60
1.375	(34.93)	7A3N	—	7B3N	—	7F3N	7J3N	19.60
1.5	(38.10)	7A1N	7A1	7B1N	—	7F1N	7J1N	19.60
1.75	(44.45)	7A7N	—	7B7N	—	7F7N	7J7N	19.60
2.00	(50.8)	7A4N	—	7B4N	—	7F4N	7J4N	32.80