Square D > On-line Catalog > Products > Push Buttons and Operator Interface > Control Stations and Enclosures: Type K Security Control Stations & Stainless Steel Flush Plates	Search

Digest 174 Quick Page Locator Enter a page number from our paper catalog to go directly to that page in our online catalog. Example: 5 - 3

Section - Page -

Control Stations and Enclosures

Type K Security Control Stations & Stainless Steel Flush Plates

Class 9001 / Refer to Catalog 9001CT0001

These flush plates accept Type K, SK, and KX 30 mm operators and contact blocks and may be used with a standard 2 in. x 3 in. general purpose switch box. A 2.5 in. deep box should be used with two Type K contact blocks mounted side by side. If two Type K contact blocks mounted in tandem are needed, a 3.5 in. deep box should be used. Although oiltight/watertight operators are used, an assembled station using the flush plates is not oiltight/watertight. The kits include the stainless steel flush plate, cover screws and a set of liners. The liners must be used to maintain electrical clearance.

 

Table 19.312:

Stainless Steel (302) NEMA 1 Flush Plates a

No. of Units	Description	Type	$ Price
1	1 Unit flush plate, cover screws, insulating liners	K25	19.10
2	2 Unit flush plate, cover screws, insulating liners	K26	28.50
3	3 Unit flush plate, cover screws, insulating liners	K27	38.00
4	4 Unit flush plate, cover screws, insulating liners	K28	57.00
a Center to center of operators is 1.812 in.

 

Table 19.313:

General Purpose NEMA 1 Flush Mounting Control Station with Pull Box for Type K Control Units

Number of Units	Enclosure Only, for Customer Assembly		Custom-Built Factory-Assembled Control Stations
	Type	$ Price	Type	$ Price
1 2 3 4 5 6 7 8	KZP1 KZP2 KZP3 KZP4 KZP5 KZP6 KZP7 KZP8	123.00 143.00 180.00 191.00 228.00 237.00 314.00 323.00	KZP10 KZP20 KZP30 KZP40 KZP50 KZP60 KZP70 KZP80	123.00 143.00 180.00 191.00 228.00 237.00 314.00 323.00

 

Special Features	Number of Units	$ Price
Type 304 Stainless steel flush plate (Form Y242):		Add
	1–4 5–8	208.00 265.00
Omit Pull Box (Form Y243):		Deduct
	1–2 3–4 5–6 7–8	57.00 77.00 95.00 114.00

Table 19.314:

30 mm Security Control Stations

Description	Type of Cylinder	Cylinder Finish	Special Features	Cast Aluminum Enclosureb		Satin Chrome Finish Flush Mounted with Box (304 Stainless Steel)
				Type	$ Price	Type	$ Price
Spring Return Key Operator Only	Corbin Yale Best Best Best Best Schlage Sargent	Chrome Brass Chrome Chrome Chrome Chrome Chrome Chrome	Complete with Corec(6 Tumbler Pins) Lock Cylinder Only—Core Omittedd(6 Tumbler Pins) Complete with Corec(7 Tumbler Pins) Lock Cylinder Only—Core Omittedd(7 Tumbler Pins)   Maximum Security Cylinder	KY198 KY199 KY197 KY196 KY195 KY194 KY193 KY192	356.00 356.00 498.00 428.00 498.00 428.00 356.00 594.00	KZC198 KZC199 KZC197 KZC196 KZC195 KZC194 KZC193 KZC192	452.00 452.00 594.00 522.00 594.00 522.00 452.00 689.00
Spring Return Key Operator with Stop Button	Corbin Yale Best Best Best Best Schlage Sargent	Chrome Brass Chrome Chrome Chrome Chrome Chrome Chrome	Complete with Corec(6 Tumbler Pins) Lock Cylinder Only—Core Omittedd(6 Tumbler Pins) Complete with Corec(7 Tumbler Pins) Lock Cylinder Only—Core Omittedd(7 Tumbler Pins) 6 Tumbler Pins Maximum Security Cylinder	KY298 KY299 KY297 KY296 KY295 KY294 KY293 KY292	428.00 428.00 570.00 498.00 570.00 498.00 428.00 665.00	KZC298 KZC299 KZC297 KZC296 KZC295 KZC294 KZC293 KZC292	522.00 522.00 665.00 594.00 665.00 594.00 522.00 759.00
b Meets NEMA 3R requirements. c When Best Lock stations are supplied with core, customer must contact local Best Lock representative to change core. d When Best Lock stations are supplied without core, customers must purchase core separately from Best Lock, and customers can subsequently change core at their convenience.

 

Refer to catalog 9001CT0001 if:

▪ Master keying is required. ▪ Station is to be keyed to a specific key number. ▪ Extra keys are required.

▪ Keying several stations alike is required. ▪ Nonstandard legend plates are required. ▪ A specific type of keyway is required.

 

Table 19.315:

Repair Parts—Replacement or Duplicate Keys

Type	Source	$ Price	Delivery
Corbin, Yale, or Schlage	Schneider Electric, local distributor, hardware store, or lock shop that duplicates keys.	9.50	8 weeks
Best	Must purchase from local Best Lock representative.	—	—
Sargent	Schneider Electric. Keys supplied with our security control station are registered to Schneider Electric.	23.70	8 weeks

Replacement enclosures are not sold. Replacement core or cylinders are not sold.

Electrical Ratings

Key Operator: One Class 9007 Type AO2 snap switch is used for the OPEN position and one snap switch is used for the CLOSE position. See page 21-4 for electrical ratings of the 9007AO2.

Stop Button: One Class 9001 Type KA1 contact block is used on the optional push button. See page 19-78 for 9001KA1 electrical ratings. (Note: The KA1 contact block has a maximum voltage rating of 300 V (NEMA A300) when used in the Type KZC station.)

 

When ordering, please specify:

▪ Quantity ▪ Class Number ▪ Type or Catalog Number

UL Listed File E42259
CNN NKCR

CSA Listed File LR25490 Class 321103

 

 

CP1	Discount Schedule