Digest 174 Quick Page Locator Enter a page number from our paper catalog to go directly to that page in our online catalog. Example: 5 - 3
30 mm Push Buttons Type KX Square Multifunction Selector Switches Class 9001 / Refer to Catalog 9001CT0001 Non-Illuminated and Illuminated 3 Position Selector Switch Operators –UL Types 4, 4X, 13/NEMA 4, 4X, 13 For use in hazardous locations—See page 19-79. Legend plate and contact block not included unless noted. e 9001 KX ______ _____ _____ _____ ____ ____ Square Multifunction 3 Position Selector Switch Codes $ Price Maintained (Non-Illuminated) SD 24.20 Spring Return Left to Center (Non-Illuminated) SE 43.20 Spring Return Right to Center (Non-Illuminated) SF 43.20 Spring Return Both Sides to Center (Non-Illuminated) SG 43.20 Maintained (Illuminated) SM 24.20 Spring Return Left to Center (Illuminated) SN 43.20 Spring Return Right to Center (Illuminated) SO 43.20 Spring Return Both Sides to Center (Illuminated) SP 43.20 a Key Operated—Maintained SV 89.00 a Key Operated—Spring Return Left to Center SW 107.00 a Key Operated—Spring Return Right to Center SX 107.00 a Key Operated—Spring Return Both Sides to Center SY 107.00 Switch Operation & Cam Codes (Choose one based on contact closure sequence; see page 19-64) Codes: B C D E 4.20 Codes: F G J L 4.20 Codes: M 4.20 No Cam Blank N/C Voltage Assembly or Key Withdrawal Code Illuminated Operator: Add Voltage Assembly Code b Non-Illuminated Operator Blank N/C Key Withdrawal Codes (Keyed Operators only; choose one code.) 4 N/C 5 N/C 6 N/C 7 N/C 8 N/C 9 N/C 10 N/C Knob Color Codes Amber A 6.60 Black a B 6.60 Green G 6.60 Blue L 6.60 Red R 6.60 White W 6.60 No Color, Keyed or Two Color Knob Blank N/C “H” Suffix Number for Contact Blocks c No Contact Blocks Blank N/C Two Color Selector Switch Knob d Standard Y178 28.50 Non-Illuminated, Keyed Operated or Not Desired Blank N/C a Not available in illuminated switches. b Choose voltage assembly code from page 19-77. For neon light modules, use clear knob color only. For LED light modules, use a knob color that matches the color of the LED (for example, a red LED uses a red knob) or use clear. Price based on light module chosen. c Select from “H” number table on page 19-80. Maximum contact block usage: 2 blocks mounted in tandem (4 blocks total). Price based on total contact blocks. d Two color knobs are used to indicate red in the left position and green in the right position on illuminated operators. Do not add a knob color code when using Form Y178. e For complete operators, see page 19-85. If the desired operator is not listed, then use this table to develop a catalog number. CP1 Discount Schedule
