Square D > On-line Catalog > Products > Push Buttons and Operator Interface > 22 mm Push Buttons: XB5 Characteristics	Search

Digest 174 Quick Page Locator Enter a page number from our paper catalog to go directly to that page in our online catalog. Example: 5 - 3

Section - Page -

22 mm Push Buttons

XB5 Characteristics

Refer to Catalog 9001CT0001

 

 

Table 19.101:

Environment

Degree of protection	Conforming to IEC 529	IP65, unless otherwise stated IP66, for booted push button heads
	Conforming to UL 50 and CSA C22.2 No. 94	Type 1, 2, 3, 4, 4X, 12, and 13, unless otherwise stated
Conforming to standards		IEC 947-1, IEC/EN 60947-5-1, IEC 947-5-4, EN 60947-1, JIS C 4520, UL 508, CSA C22.2 No. 14
Product certifications	UL Listed, CSA	Standard single contacts with screw clamp terminals: A600; Q600 Double contacts with screw clamp terminals: A600; Q600 Light modules with screw clamp terminals JOYSTICK XD4-PA: A600; R300
	BV, RINA, LROS, DNV, GL (pending)	Standard single contacts and double contacts with screw clamp terminals
Electrical Characteristics of Operators and Contact Blocks
Cabling capacity	Conforming to IEC 947-1	Screw and captive clamp terminals Min: 1 x 24 AWG (0.22 mm2) without cable end 1 x 22 AWG (0.34 mm2) for linking Max: 2 x 16 AWG (1.5 mm2) with cable end 2 x 14 AWG (2.5 mm2) without cable ends Cross headed screw (POZIDRIV type 1) slotted for flat 4 and 5.5 mm screwdriver
Maximum Contact Block Usage	XB5/ZB5 Maximum Number of Blocks	Push buttons (Non-Illuminated)		9
		Selector switches (Non-Illuminated)		6
		Push buttons (Illuminated)		6
		Selector Switches (Illuminated)		4
		Mushrooms, Push Pull (Non-Illuminated)		6
		Mushrooms, Push Pull (Illuminated)		4
		Mushrooms, Turn-to-Release (Non-Illuminated)		6
		Mushrooms, Trigger Action (Non-Illuminated)		4
		Push-on/Push-off (Non-Illuminated)		3
		Push-on/Push-off (Illuminated)		2
Rated operational characteristics Conforming to IEC/EN 60947-5-1	AC supply: Utilization category AC-15	Standard blocks (single or double) with screw clamp terminals: A600: Ue = 600 Vac and le = 1.2 A or Ue = 240 Vac and le = 3 A or Ue = 120 Vac and le = 6 A Continuous Thermal Current 10 A
	DC supply: Utilization category DC-13	Standard single or double blocks with screw clamp terminals: Q600: Ue = 600 Vdc and le = 0.1 A or Ue = 250 Vdc and Ie = 0.27 A or Ue = 125 Vdc and le = 0.55 A Joystick XD4PA: R300: Ue = 125 Vdc and le = 0.22 A or Ue = 250 Vdc and le = 0.1 A
Electrical durability Conforming to IEC/EN 60947-5-1 Appendix C Operating rate 3600 operating cycles/hour. Load factor: 0.5	AC supply for 1 million operating cycles, utilization category AC-15	Standard blocks for screw clamp terminals:
		24 Vac	120 Vac	230 Vac
		4 A	3 A	2 A
		Standard double blocks with screw clamp terminals:
		24 Vac	120 Vac	230 Vac
		3 A	1.5 A	1 A
	DC supply for 1 million operating cycles, utilization category DC-13	Standard single blocks for screw clamp terminals:
		24 Vdc	110 Vdc
		0.5 A	0.2 A
		Standard double blocks with screw clamp terminals:
		24 Vdc	110 Vdc
		0.4 A	0.15 A
Electrical Characteristics of Light Modules
Cabling capacity	Conforming to IEC 947-1	Screw and captive clamp terminals Min: 1 x 24 AWG (0.22 mm2) without cable end 1 x 22 AWG (0.34 mm2) for linking Max: 2 x 16 AWG (1.5 mm2) with cable end
Specific Characteristics of PROTECTED LED® Light Modules Only
Voltage limits	Nominal voltage	24 V: 19.2 to 30 Vdc, 21.6 to 26.4 Vac; 120 V: 102 to 132 Vac; 240 V: 195 to 264 Vac
Current consumption	Applicable to all colors	24 Vac/Vdc supply blocks: 18 mA 120 Vac supply blocks: 14 mA 240 Vac supply blocks: 14 mA
Specific Characteristics of Hour Counters and Annunciators
Voltage limits	Hour counter and annunciator	± 10% of nominal voltage
Current consumption	Hour counter	XB5DSB: 7 to 15 mA
		XB5DSG: 8 mA
		XB5DSM: 8 mA
	Annunciator	5 mA