Digest 174 Quick Page Locator Enter a page number from our paper catalog to go directly to that page in our online catalog. Example: 5 - 3
22 mm Push Buttons XB4 Characteristics Refer to Catalog 9001CT0001 Table 19.49: Environment Degree of protection Conforming to IEC 529 IP65, unless otherwise stated IP66, for booted push button heads Conforming to UL 50 and CSA C22.2 No. 94 Type 1, 2, 3, 4, 4X, 12, and 13, unless otherwise stated Conforming to standards IEC 947-1, IEC/EN 60947-5-1, IEC 947-5-4, EN 60947-1, JIS C 4520, UL 508, CSA C22.2 No. 14 Product certifications UL Listed, CSA Standard single contacts with screw clamp terminals: A600; Q600 Double contacts with screw clamp terminals: A600; Q600 Light modules with screw clamp terminals JOYSTICK XD4-PA: A600; R300 BV, RINA, LROS, DNV, GL (pending) Standard single contacts and double contacts with screw clamp terminals Electrical Characteristics of Operators and Contact Blocks Cabling capacity Conforming to IEC 947-1 Screw and captive clamp terminals Min: 1 x 24 AWG (0.22 mm2) without cable end 1 x 22 AWG (0.34 mm2) for linking Max: 2 x 16 AWG (1.5 mm2) with cable end 2 x 14 AWG (2.5 mm2) without cable ends Cross headed screw (POZIDRIV type 1) slotted for flat 4 and 5.5 mm screwdriver Maximum Contact Block Usage XB4/ZB4 Maximum Number of Blocks Push buttons (Non-Illuminated) 9 Selector switches (Non-Illuminated) 6 Push buttons and selectors (Illuminated) 6 Mushrooms, Push Pull (Non-Illuminated) 6 Mushrooms, Push Pull (Illuminated) 4 Mushrooms, Turn-to-Release (Non-Illuminated) 6 Mushrooms, Trigger Action (Non-Illuminated) 4 Push-on/Push-off (Non-Illuminated) 3 Push-on/Push-off (Illuminated) 2 Rated operational characteristics Conforming to IEC/EN 60947-5-1 AC supply: Utilization category AC-15 Standard blocks (single or double) with screw clamp terminals: A600: Ue = 600 Vac and le = 1.2 A or Ue = 240 Vac and le = 3 A or Ue = 120 Vac and le = 6 A Continuous Thermal Current: 10 A DC supply: Utilization category DC-13 Standard single or double blocks with screw clamp terminals: Q600: Ue = 600 Vdc and le = 0.1 A or Ue = 250 Vdc and Ie = 0.27 A or Ue = 125 Vdc and le = 0.55 A Joystick XD4-PA: R300: Ue = 125 Vdc and le = 0.22 A or Ue = 250 Vdc and le = 0.1 A Electrical durability Conforming to IEC/EN 60947-5-1 Appendix C Operating rate 3600 operating cycles/hour. Load factor: 0.5 AC supply for 1 million operating cycles, utilization category AC-15 Standard blocks for screw clamp terminals: 24 Vac 120 Vac 230 Vac 4 A 3 A 2 A Standard double blocks with screw clamp terminals: 24 Vac 120 Vac 230 Vac 3 A 1.5 A 1 A DC supply for 1 million operating cycles, utilization category DC-13 Standard single blocks for screw clamp terminals: 24 Vdc 110 Vdc 0.5 A 0.2 A Standard double blocks with screw clamp terminals: 24 Vdc 110 Vdc 0.4 A 0.15 A Electrical Characteristics of Light Modules Cabling capacity Conforming to IEC 947-1 Screw and captive clamp terminals Min: 1 x 24 AWG (0.22 mm2) without cable end 1 x 22 AWG (0.34 mm2) for linking Max: 2 x 16 AWG (1.5 mm2) with cable end Specific Characteristics of Protected LED® Light Modules Only Voltage limits Nominal voltage 24 V: 19.2 to 30 Vdc, 21.6 to 26.4 Vac; 120 V: 102 to 132 Vac; 240 V: 195 to 264 Vac Current consumption Applicable to all colors 24 Vac/dc supply blocks: 18 mA 120 Vac supply blocks: 14 mA 240 Vac supply blocks: 14 mA
Release Date: 03/31/2007Modification Date: 1/16/2008
