Square D > On-line Catalog > Products > IEC Contactors and Starters > Busbar Accessories: TeSys AK5 Panel Busbar System	Search

Digest 174 Quick Page Locator Enter a page number from our paper catalog to go directly to that page in our online catalog. Example: 5 - 3

Section - Page -

Busbar Accessories

TeSys™ AK5 Panel Busbar System

Refer to Catalog 8502CT0101

The AK5 pre-fabricated bus bar system provides a quick and easy method of mounting control devices. All components are finger safe, UL Listed, CSA approved and CE marked. Although the AK5 system can be screw mounted onto any type of support, it must be mounted on the AM1DL201 DIN rail when component mounting plates incorporating a tap-off are used. When using tap-offs, the nominal operating current of the bus bar (160 Amperes @ 35o) must not be exceeded.

 

Table 18.146:

160 Ampere Three Phase Busbar System

Maximum number of mounting plates						Length		Catalog Number	$ Price
Tap-off		Standard Width Plate		Extension Plate
IN	mm	IN	mm	IN	mm
1.42	36	2.13	54a	2.80	71	IN	mm
6		4		2		13.39	344	AK5JB143	140.00
9		6		3		17.64	452	AK5JB144	177.00
12		8		4		21.85	560	AK5JB145	187.00
15		10		5		26.05	668	AK5JB146	230.00
24		16		8		38.69	992	AK5JB149	262.00
27		18		9		42.90	1100	AK5JB1410	360.00

a	Auxiliary contacts on INTEGRAL 18 will reduce maximum number of devices–see table below.

 

Table 18.147:

Mounting Plate Tap-off Plugs into busbar mounted on AM1DL201 DIN rail.

Width		Thermal Current Amperes	Application	Catalog Number	$ Price
IN	mm
2.13	54	25 A	Integral 18 & 32 & GV2	AK5PA231	65.00
2.13	54	25 A	GV2 & Contactor	AK5PA232	80.00
4.25	108	25 A	GV2 & Reversing Contactor	AK5PA232S	137.00

 

Table 18.148:

Bus Tap-off Plugs into busbar for wiring to a separately mounted device.

Width		Thermal Current Amperes	Length of Leads		Catalog Number	$ Price
IN	mm		IN	mm
1.42	36	32 A	9.84	250	AK5 PC33	15.30
1.42	36	32 A	39.37	1000	AK5 PC33L	25.20

 

Table 18.149:

Extension Plates Used to mount wider components. Bolt to standard mounting plates (after DIN rails are removed).

Width		Application	Catalog Number	$ Price
IN	mm
2.80	71	INTEGRAL 32	AK5PE17	13.10
2.80	71	GV & Reversing contactor	AK5PE27	17.50

 

Table 18.150:

Mounting Rail Must be used for mounting plates with tap-offs.

Description	Depth	Length	Catalog Number	$ Price
	mm	mm
75 mm Omega Rail	15	2000	AM1DL201	27.40

 

Table 18.151:

Maximum Number of Devices Per Busbar System b

Device	Used with	AK5 Busbar System
		JB143	JB144	JB145	JB146	JB149	JB1410
AK5PA231 Mounting Plate	INTEGRAL 18 Only	4	6	8	10	16	18
	INTEGRAL 18 with 1 aux. block	4	6	8	10	16	18
	INTEGRAL 18 with 2 aux. blocks	3	4	6	7	12	14
	INTEGRAL 18 with 3 aux. blocks	2	4	5	6	10	12
	AK5PE17/27 extension plate	3	4	6	8	13	14
AK5PC33/PC33L	...	6	9	12	15	24	27

b	The AK5 system may be used with GV2 and GV3 devices in combination with LC1D contactors and INTEGRAL 32 devices.

 

 

Table 18.152:

Approvals: IEC 439, UL, CSA, DNV, LROS

File E161251 CCN NMTR