Square D > On-line Catalog > Products > IEC Contactors and Starters > Starters Accessories: TeSys Manual Starter and Protector and TeSys GV2 and GV3 Manual Starters and Protectors	Search

Digest 174 Quick Page Locator Enter a page number from our paper catalog to go directly to that page in our online catalog. Example: 5 - 3

Section - Page -

Starters Accessories

TeSys™ GV2 and GV3 Manual Starters and Protectors

Refer to Catalog 2502CT0001

 

Table 18.125:

Voltage Trips

Only one trip or fault signaling contact can be installed per GV2/GV3 device.
Description	Characteristics	Voltage	Frequency	Catalog Numbera	$ Price
Voltage trips GV2 & GV3	Undervoltage or Shunt trip (external mount, 1 block right side only)	24 V	50 Hz	GVA•025	54.00
			60 Hz	GVA•026
		48 V	50 Hz	GVA•055
			60 Hz	GVA•056
		100–110 V	50/60 Hz	GVA•107
		110–115 V	50 Hz	GVA•115
			60 Hz	GVA•116
		120–127 V	50 Hz	GVA•125
		127 V	60 Hz	GVA•115
		200 V	50 Hz	GVA•207
		200–220 V	60 Hz	GVA•207
		220–240 V	50 Hz	GVA•225
			60 Hz	GVA•226
		380–400 V	50 Hz	GVA•385
			60 Hz	GVA•386
		415–440 V	50 Hz	GVA•415
		415 V	60 Hz	GVA•416
		440 V	60 Hz	GVA•385
		480 V	60 Hz	GVA•415
		500 V	50 Hz	GVA•505
		600 V	60 Hz

a	To order an under voltage trip: replace the bullet ( •) with a U, example: GVAU025. To order a shunt trip: replace the bullet ( •) with an S, example: GVAS025.

 

Table 18.126:

Auxiliary Contact Blocks

Description	Mounting Location	Max. No. of Blocks	Contact Type	Sold in lots of	Catalog Number	$ Price
Instantaneous auxiliary contacts GV2 + GV3	Frontbg	1	N.O. or N.C.c	1	GVAE1	14.50
			N.O. + N.C.	10	GVAE11e	23.80
			N.O. + N.O.	1	GVAE20e	23.80
	Left Hand Side	2	N.O. + N.C.	1	GVAN11e	23.80
			N.O. + N.O.	1	GVAN20e	23.80
Fault signaling contact + instantaneous auxiliary contact GV2 + GV3	Left Hand Sided	1	N.O. (fault) + N.O.	1	GVAD1010	36.20
			N.O. (fault) + N.C.	1	GVAD1001	36.20
			N.C. (fault) + N.O.	1	GVAD0110	36.20
			N.C. (fault) + N.C.	1	GVAD0101	36.20
Short circuit signaling contact GV2 + GV3	Left Hand Side	1	SPDT	1	GVAM11	23.80

b	Mounting of a GVAE contact block or a GV2AK00 visible isolation block on GV2P.

c	Choice of N.C. or N.O. contact operation, depending on which way the reversible block is mounted.

d	The GVAD is always mounted next to the starter.

e	For spring terminals add 3 to the catalog number. Example: GVAE113

f	One trip or one fault signaling can be fitted per GV3.

g	Cannot be used with GV2GH7 insulator.

 

Table 18.127:

Voltage Trips–Technical Data (GV2AU, GV2AS)

Rated Voltage–660 Vac
Model	Inrush	Sealed	Pick-Up Voltage	Drop-Out Voltage	Operating Timeh
GVAU	12 VA / 8 W	3.5 VA / 1.1 W	0.8 to 1.1	0.35 to 0.7	10 to 15 ms
GVAS	14 VA / 10.5 W	5 VA / 1.6 W	0.7 to 1.1	0.2 to 0.75	10 to 15 ms

h	From the loss of voltage at the trip terminals to the opening of the starter contacts.

 

Table 18.128:

GV3P Accessories

Description	For GV3P	Catalog Number	$ Price
Set of 3-pole 115 A busbars (tap-offs: 3, pitch: 64 mm)	GV3P••	GV3G364	30.00
Cover “Larger Spacing” UL 508 type E (Only one cover required on supply side)	GV3P••	GV3G66	12.00
IP 20 cover (Two covers required per starter)	GV3P••	LAD96570	8.00
Padlocking device For use with up to 4 padlocks (not supplied) Ø 6 mm shank maximum	GV3P•• GV3P•••	GV2V03	130.00

 

CP10

I11

Discount Schedule

Modified 1/17/08