Page 16-121 Download PDF
Home Online Catalog Products Tools and Resources Help

Square D > On-line Catalog > Products > NEMA Contactors and Starters > Starter Accessories: Replacement Parts Kits	Search

Digest 174 Quick Page Locator Enter a page number from our paper catalog to go directly to that page in our online catalog. Example: 5 - 3

Section - Page -

Replacement Parts Kits

Starter Accessories

Class 9998, 9999

Contact Units for Melting Alloy Type Overload Relays

One normally closed contact, Class 9998 Type SO1, is provided in each overload relay block on Type S starters Sizes 00-4 and Size 6. On the Type S Size 5, a normally closed contact is provided with each of the three overload relay blocks. The Class 9998 Type SO1 contact unit listed below is provided as standard in each Class 9065 melting alloy overload relay. Contact modules can be easily replaced and are identified in the table below. Isolated overload relay alarm circuit contacts are available as an optional feature. A pilot light or alarm bell can be wired in series with this contact to indicate that the overload relay has tripped. For further information on isolated alarm contacts refer to Class 9999 Types SO4 and SO5 (page 16-126).

 

Table 16.345:

Magnetic Starter			Description a	Parts Kit Number	$ Price
NEMA Size	Type	Series
00–4 & 6	SA–SF SH	A & B	Standard N.C. contact unit	Class 9998 Type SO1b	39.40
5	SG	A	Standard N.C. contact unit	3110251450	134.00
			N.C. and N.O. alarm (three point) contact unit	3110251451	196.00

a	Refer to page 16-123 for contact ratings.

b	The Type SO1 is also the replacement contact unit for Class 9065 Type M melting alloy overload relays.

 

 

 

Class 9998 Type UB Universal Baseplate

A universal baseplate may be used to retrofit a Square D Type S NEMA starter into an application which is currently using a competitive NEMA starter. The universal baseplate is a metal plate which attaches to the panel in the location of the starter to be replaced. The Type S starter then mounts to the baseplate. It is available for NEMA Sizes 00 through 4, and mounting screws are provided with each plate.

The universal baseplate adapter allows the Type S starter to replace the following competitive starters:

 

Table 16.346:

Competitor Starter	NEMA Size	Baseplate	NEMA Size	Baseplate	NEMA Size	Baseplate	NEMA Size	Baseplate	$ Price
Allen Bradley 509	0, 1	UB01	2	UB02	3	UB03	4	UB04	No charge
Allen Bradley 709	1		2		3		4
Cutler Hammer Freedom Series	00, 0, 1		2		3		4
Furnas ESP100	0, 1		2		3		4
Furnas INNOVA	0, 1		2		3		4
General Electric CR306	00, 0, 1		2		3		4
Telemecanique “A” Line and Pre-type “S”	0, 1	UB11	2	UB12	3	UB13	4	UB14

Melting Alloy Overload Relay Jumper Strap Kits

Jumper strap kits are for use on three-phase manual or magnetic starters with melting alloy overload relays only, where a three-phase starter is used to control a single-phase motor. These kits will include two jumper straps, a wiring diagram showing how to wire a three-phase starter to control a single-phase motor, and single-phase (one thermal unit) selection tables.

Table 16.347:

Melting Alloy Overload Relay Jumper Strap Kits

Class	For Starter		Class 9998 Kit Type	$ Price c
	Size	Type
ALL	00, 0, 1, 2 and M0 & M1	SA, SB, SC, SD and M & T (Manual)	SO31	9.50
	3,4	SE, SF	SO32	14.30
	5	SG	None Available

c	CP1 discount schedule.

How to Order

 

Table 16.348:

How to Order

To Order Specify:	Catalog Number
▪ Class Number ▪ Type Number	Class	Type
	9998	UB01

 

CP10

CP1

Discount Schedule

Modified 4/13/08