|
|
|||||
|
|
|||||
Square D > On-line Catalog >
Products
>
NEMA Contactors and Starters > AC Duplex Motor Controllers: 3-Pole Polyphase Non-Combination Type |
|
|
|
Section - Page
|
AC Duplex Motor Controllers
Class 8941
Duplex Motor Controllers are used to control two motors, and consist of two starters in a common enclosure. Two separate disconnect switches or circuit breakers with operators are included with all combination devices. Unless Form Y68 is specified, an alternation circuit (a Class 8501 Type XO40 relay) is included, which alternately operates first one motor and then the other on each successive closing of a pilot device. Both motors will be energized should a second pilot device close. All devices incorporate a terminal block to simplify wiring of pilot devices A and B. Typical applications include pump motors where a second pump is required for peak demand periods yet alternation is desirable to equalize pump wear.
Table 16.259: 3-Pole Polyphase—600 Vac Maximum (50–60 Hz)
Non-Combination Type—Without Disconnect—With Electric Alternation
Note that the prices shown do not include thermal units. Devices require 6 thermal units.
Standard trip thermal units are $14.30 each. See page 16-129 for selection information. NEMA
Size Open
Type Hp
Polyphase 200–230
460–575 200–230
460–575 460–575
Table 16.260: 3-Pole Polyphase—600 Vac Maximum (50–60 Hz)
Combination Thermal Magnetic Circuit Breaker Type—With Electric Alternation
Note that the prices shown do not include thermal units. Devices require 6 thermal units. Standard trip thermal units are $14.30 each. See page 16-129 for selection information. Coil
Voltage NEMA
Size Circuit
Breaker Frame
Size Ampere
Rating 200
(208) 208–60 230
(240) 240–60
220–50 FAL
KAL 100
110 150
200 460
(480) 480–60
440–50