Square D > On-line Catalog > Products > Medical Products > Medical Products: Table of Contents	Search

Download Section 15 PDF

Table of Contents

Section 15 

Medical Products

 

Duplex Isolation Power Panel, see page 15-3

Surgical Facility Panel, see page 15-4

 

Line Isolation Monitor (LIM), Iso-Gard® Series D			15-1
Isolated Power Panels			15-2
	Operating Room Panels		15-2
	ICU/CCU Panels		15-2
	Controlled Isolation Power Panels (For X-ray and Laser Receptacles)		15-2
Duplex Panels			15-3
	Duplex Power Panels		15-3
	Power/Ground Modules		15-3
Surgical Facility Panels			15-4
	Surgical Facility Panels		15-4
	Isolation Transformers		15-4
Dual Output Voltage Panels			15-5
Accessories			15-6
	Accessories Panels		15-6
	X-ray and Laser Receptacles		15-6
	Supervisory Modules		15-6
	Nurses’ Station Indicator-Alarm Annunciator		15-6
	Digital Clock/Timers		15-6
	Remote Alarm Indicators		15-6

All Square D® brand Isolation Power Panels meet or exceed UL® 1022 and 1047 and are cUL Listed.

All products listed in this section are available through standard ordering procedures from authorized Schneider Electric distributors. For more information, contact your nearest Schneider Electric sales office or distributor. Call 1‑888‑Square D (778-2733) or visit www.us.squared.com.

Iso-Gard® Line Isolation Monitor—UL Recognized

The Square D brand Iso-Gard Series D microprocessor controlled line isolation monitor (LIM) is included as standard equipment in all Schneider Electric hospital isolation panels. This LIM is also available as a replacement unit for older LIMs, is a direct replacement for all previous Schneider Electric LIMs, and is electrically compatible with all hospital isolated power systems.

Standard Equipment

●	Automatic and manual self-test and self-calibration that reduces the frequency of required periodic testing

●	Digital and analog display

●	Unique audible alarm that will not be confused with other equipment

●	UL component recognized and CSA classified

●	Microprocessor controlled circuitry for highest accuracy and stability

Specifications

 

Operating Voltage	85–265 Vac, 50 or 60 Hz
Hazard Current Alarm Level	2 or 5 mA (selectable)
Mode	Single or three phase (selectable)
Monitor Hazard Current	25 µA or less

The National Electrical Code® (NEC®) requires audible and visual alarm indication where isolation power is used (NEC 517-160).