Square D > On-line Catalog > Products > Wire Management > Wall Duct / Trench Duct: Accessories	Search

Digest 174 Quick Page Locator Enter a page number from our paper catalog to go directly to that page in our online catalog. Example: 5 - 3

Section - Page -

Wall Duct / Trench Duct

 

Class 5230 / Refer to Catalogs 5250CT9201, 5200CT9501

Wall Duct Accessories

 

Table 13.4:

Lay-In Wall Duct Accessories

Accessories	Catalog Number	$ Price	Weight Lbs.
5'–0" Partition	RWTP60	100.00	5.4
Straight through tunnel for tees a 10"W 18"W	RWT10ST RWT18ST	100.00 124.00	2.9  3.8
90o Elbow tunnel for crosses a 10"W 18"W	RWT10ET RWT18ET	150.00 222.00	3.2  5.1
3 compartment tunnel for tees 10"W 18"W	RWT10PTE RWT18PTE	368.00 420.00	5.0 6.0
3 compartment tunnel for crosses 10"W 18"W	RWT10PXE RWT18PXE	526.00 630.00	8.0 9.0
Edgewise Tee Kit 10"W 18"W	RWT10ETK RWT18ETK	150.00 222.00	1.3  2.1
Sweep Edgewise Tee Kit 10"W 18"W	RWT10SWET RWT18SWET	822.00 990.00	8.0  8.0
Flush to Surface Adaptor 10"W 18"W	RWT10FS RWT18FS	418.00 522.00	11.9 16.4
Ceiling Drop-Out 12x12 Flush Cover 8"x8"	RWTCDO	584.00	15.0
Extra Coupling Device 10"W 18"W	RWT10COUP RWT18COUP	40.80 64.00	.4   .5
Extra Straight Cover—30" long (Order 2 pcs. for 5 ft. of duct.) Flush 10"W 18"W Surface 10"W 18"W	RWT10SCOV RWT18SCOV RWT10SCOVS RWT18SCOVS	100.00 130.00 69.40 130.00	7.2 13.0  6.1 11.8

a	Tunnels form a 3" wide compartment.

b	All devices available in aluminum. Prices are double; add “A” to end of catalog number.

 

Table 13.5:

Wall Duct Accessories

Accessories	Catalog Number	$ Price	Weight Lbs.
Reducer Coupling— 18" to 10" 10" to 6"	RWTRC RWT06RC	150.00 150.00	2.1  1.6
Cabinet Connector 6"W 10"W 18"W	RWT06CC RWT10CC RWT18CC	150.00 150.00 222.00	1.0  1.3  2.4
End Cap 6"W 10"W 18"W	RWT06EC RWT10EC RWT18EC	84.00 84.00 104.00	1.0 1.3 1.8
Vertical Elbows for: 6" Trench to 6" Wall Duct 12" Trench to 10" Wall Duct 12" Trench to 18" Wall Duct   18" Trench to 10" Wall Duct 18" Trench to 18" Wall Duct	RWT06FTVE06 RWT10FTVE12 RWT18FTVE12   RWT10FTVE18 RWT18FTVE18	150.00 150.00 268.00   184.00 230.00	1.1 1.2   1.2 1.3
Sweep Trench Duct to Wall Duct Adapter (available in surface cover only).   12" Trench to 10" Wall Duct  18" Trench to 18" Wall Duct	RWT10SWFTVE12 RWT18SWFTVE18	348.00 522.00	10.0 14.0
Split Cover with Grommet. 12" long–3"x 8" Opening Flush 6"W 10"W 18"W   Surface 6"W 10"W 18"W	RWT06ACP RWT10ACP RWT18ACP   RWT06ACPS RWT10ACPS RWT18ACPS	94.40 94.00 104.00   73.80 73.80 83.60	2.6 3.1 4.8   2.0 2.7 4.0
Dust Cover—5 ft. Long	RWTDCOV60	140.00	5.5
Grommett—100 ft roll	RWTBG100	440.00

Trench Duct

1.	STANDARD LENGTH of trench duct is 10 ft. Gasketed cover plates are ordered and shipped separately.

2.	FEATURES of trench duct:

■	Trench duct width is cover plate width.

■	Tub width is trench duct width less 1.8".

■	Overall width (bottom flange to flange) is 3" wider than trench duct width.

■	Standard depth is adjustable from 2-3/8" to 3-3/8". Also available as standard is depth adjustable from 3" to 4". To order change “2” to “3”. Ex. RSV063100120. Applies to trench duct, elbows, crosses tees and reducers. Same price as standard device. Other depths available.

■	Tees, crosses, horizontal elbows and reducers are shipped complete with cover plates assembled.

■	Grey vinyl tile trim is furnished as standard. Aluminum is available when requested.

■	All compartments over 17" wide must be supported with dividers or posts.

3.	PRICES for Additions and Special Features:

■	For each foot of adjustable partition add $64.00 per foot of partition.

■	For each 1" of depth beyond range of 3" to 4" add $32.00 per foot of trench duct.

■	For double tile trim on two sides of cover plate ONLY add $120.00 per foot of trench duct.

■	For double tile trim on all four sides of cover plate add $400.00 per foot of trench duct.

■	For support post add $64.00 per foot of trench duct for each row of posts required.

■	Underfloor duct connection into bottom, add $300.00 per connection.

■	Underfloor duct connection into side with trench tunnels, add $600.00 per connection.

 

Table 13.6:

Assembled Trench Duct All part numbers listed below are for 2 3/8"–3 3/8" deep, one compartment trench with vinyl tile trims.

Straight Sections	Trench Duct				Complete Device
	Length	Width	Catalog Number	$ Price	Per 10' Length	Per Foot
Full Length	10'-0"	6"  9" 12" 18" 24" 30" 36"	RSV062100120 RSV092100120 RSV122100120 RSV182100120 RSV242100120 RSV302100120 RSV362100120	1840.00 1840.00 2220.00 2640.00 3160.00 3800.00 4580.00	3240.00 3240.00 3920.00 4740.00 5660.00 7100.00 8680.00	324.00 324.00 392.00 474.00 566.00 710.00 868.00
	Covers Only (5 Plates per 10' Length) c
	24"	6"  9" 12" 18" 24" 30" 36"	RCP0624 RCP0924 RCP1224 RCP1824 RCP2424 RCP3024 RCP3624	280.00 280.00 340.00 420.00 500.00 660.00 820.00	3240.00 3240.00 3920.00 4740.00 5660.00 7100.00 8680.00	324.00 324.00 392.00 474.00 566.00 710.00 868.00
	12"	12" 18"	RCP1212 RCP1812	268.00 334.00	— —	— —
Factory Cut-to-Length (12" Wide Only)	6'-0"L 4'-3- 1/2"L 3'-3- 1/2"L 2'-0"L 1'-0"L 0'-3-1/2"L	12" 12" 12" 12" 12" 12"	RSV122100072 RSV122100051.5 RSV122100039.5 RSV122100024 RSV122100012 RSV122100003.5	1654.00 1102.00 1102.00 550.00 550.00 268.00	—	—
	3–24" Long Covers d  2–24" Long Covers & 1 – Wall Duct Vertical Elbow d  1–24" & 1–12" Long Cover & 1—Wall Duct Vertical Elbow d  1–24" Long Cover d  1–12" Long Cover d  1–Wall Duct Vertical Elbowd					All ordered sepa­rately

c	Straight length cover plates are shipped separately and must be ORDER SEPARATELY.

d	Covers and/or vertical elbows for connecting trench duct to lay-in wall duct—ORDER SEPARATELY.

 

PE10

Discount Schedule

Modified 1/17/08