Square D > On-line Catalog > Products > Switchboards and Switchgear > Switchgear: Medium Voltage Metal-Enclosed—HVL	Search

Digest 174 Quick Page Locator Enter a page number from our paper catalog to go directly to that page in our online catalog. Example: 5 - 3

Section - Page -

Switchgear

Medium Voltage Metal-Enclosed—HVL

Class 6040 / Refer to Catalog 6040CT9201 or Brochure 6040BR9401

 

Ratings

Max. Design Voltage (kV)	4.76	15.0
BIL (kV)	60	95
Frequency (Hz)	50/60	50/60
Continuous amperes	600	600
Interrupting amperes	600	600
Momentary (amperes asymmetrical)	40,000	40,000
Fault close (amperes asymmetrical)	40,000	40,000
Capacitor switching (kVAR)	2,400	2,400
Short-time rating, 2 seconds (amperes symmetrical)	25,000	25,000
Low frequency withstand (kV)	19	36

 

Distribution Class Surge Arresters

System L-L Voltage kV		Arrester MCOV-kV
Nominal	Maximum	Effectively Grounded Neutral Circuits	Impedance Grounded and Ungrounded Circuits
2.4  4.16  4.8  6.9 12.0	2.54  4.4  5.08  7.26 12.7	— 2.55 — —  7.65	2.55  5.1  5.1  7.65 12.70
12.47 13.2 13.8	13.2 13.97 14.52	7.65  8.4  8.4	12.70 — —

 

Enclosure Type

Type	W		D		H		Weight
	in	mm	in	mm	in	mm	lbs	kg
Indoor	38.00	965	54.50	1384	90.00	2286	1200	545
Outdoor	38.00	965	60.00	1524	97.50	2477	1400	636

Provisions for Future Expansion

All “single” Digest switches have provisions for future expansion on either side. Order kits HVMB for top crossover copper 600 ampere bus and HVLC for line connections to the top bus. (Refer to the Factory Modifications table on page 11-13.) Include sketch for factory-assembled parts or lineups.

HVL Switches for Power-Dry™,
Power-Cast®, and Uni-Cast® Transformer Connections

HVL switches can be configured for close coupling cable connections to listed dry type transformers for primary main switches of unit substations. These are listed in the tables below with current-limiting or boric acid fuses. Both single and duplex switch mains are included in this selection. Transformers are listed on page 14-20 and may not be suitable for close coupling. For transformer availability and specific configurations, contact your local Schneider Electric sales office. All connections in this digest are based on Square D® standard transformer connections. If these switches are used to connect to other manufacturers’ transformers, then connections must coordinate with
Square D connections. (Cable connections are furnished with the transformer.)

600 Ampere “Single” Switch with PROVISIONS ONLY for Square D Current-Limiting Non-Disconnect Type
Fuses for Cable Connection to Power-Dry,
Power-Cast and Uni-Cast Transformers
(FLC = 300 Ampere MAXIMUM)
RH—Transformer on Right, LH—Transformer on Left

Catalog No.	kV Rating	Fuse Range	Enclosure Type	RH / LH	$ Price
HVL405DEGR	4.76	10–450E	NEMA 1	RH	20134.00
HVL405DEGL	4.76	10–450E	NEMA 1	LH	20134.00
HVL405DEWRH	4.76	10–450E	NEMA 3R	RH	25322.00
HVL405DEWLH	4.76	10–450E	NEMA 3R	LH	25322.00
HVL415DEGR1	15	10–100E	NEMA 1	RH	20614.00
HVL415DEGR2	15	125–200E	NEMA 1	RH	20614.00
HVL415DEGL1	15	10–100E	NEMA 1	LH	20614.00
HVL415DEGL2	15	125–200E	NEMA 1	LH	20614.00
HVL415DEWR1H	15	10–100E	NEMA 3R	RH	28070.00
HVL415DEWR2H	15	125-200E	NEMA 3R	RH	28070.00
HVL415DEWL1H	15	10–100E	NEMA 3R	LH	28070.00
HVL415DEWL2H	15	125-200E	NEMA 3R	LH	28070.00
600 A “Duplex” Switch with PROVISIONS ONLY for SQUARE D Current-Limiting Non-Disconnect Type Fuses for Cable Connection to Power-Dry, Power-Cast and Uni-Cast Transformers (FLC = 300 Ampere MAXIMUM) RH—Transformer on Right, LH—Transformer on Left
HVL505DEGR	4.76	10–450E	NEMA 1	RH	42028.00
HVL505DEGL	4.76	10–450E	NEMA 1	LH	42028.00
HVL505DEWRH	4.76	10–450E	NEMA 3R	RH	49484.00
HVL505DEWLH	4.76	10–450E	NEMA 3R	LH	49484.00
HVL515DEGR1	15	10–100E	NEMA 1	RH	43084.00
HVL515DEGR2	15	125–200E	NEMA 1	RH	43084.00
HVL515DEGL1	15	10–100E	NEMA 1	LH	43084.00
HVL515DEGL2	15	125–200E	NEMA 1	LH	43084.00
HVL515DEWR1H	15	10–100E	NEMA 3R	RH	54904.00