IPaCS Equipment

Modular Panelboard System and Integrated Power Center

Class 2210 and Class 2220 / Refer to Documents 2010CT0001 and 2735CT0001

Modular Panelboard System (MPS)

The pre-engineered MPS consists of a mix of NQOD, NF and I-Line® interiors, transformers and lighting control. It is applicable when third-party building control systems are not required. Special interiors are available such as column width and Powerlink®. Options include power and control cable wiring, contactors, terminal blocks, TVSS and equipment space.

Equipment space options include factory-installed lighting contactors in three configurations:

1.	Unwired: Mounted in cell only

2.	Line side wired: Line side of each pole is wired to a branch circuit breaker

3.	Fully wired: Line side of each pole is wired to a branch circuit breaker, load side of each pole wired to a terminal block

Built on a panelboard platform, MPS sections are NEMA 1 rated and meet the requirements of UL 67. Individual sections are 86 in. (2184 mm) high x 9.5 in. (241 mm) deep; widths vary from 10 in. (254 mm) to 44 in. (1118 mm).

Layout/Lead Time/Pricing:

Contact your nearest field sales office.

Shipping:

Integrated equipment line-ups are shipped as a factory-assembled, pre-wired system. Customers may specify single or multiple section shipping splits (some limitations apply). In addition, lineups may be ordered with or without factory-installed power cables.

Integrated Power Center (IPC)

The custom-designed Integrated Power Center allows for greater design flexibility with the integration of a variety of controls, including:

●	Electrical distribution

●	Power quality

●	Building automation

●	Surge suppression

●	Lighting controls

●	HVAC controls

Integrated Power Centers are NEMA 1 rated and meet the requirements of UL 891. As with all integrated solutions, IPCs are shipped to the site fully-assembled, completely pre-tested and ready to install. IPC sections are 84 in. (2134 mm) high x 10.25 in. (260 mm) deep; widths vary depending upon customer specifications.

Individual IPC configurations include NF, NQOD or I-Line panel sections in full height, stacked or side-by-side arrangements. In addition, combination sections combine electrical distribution panels with equipment space for building controls.

Equipment space options include factory-installed lighting contactors in three configurations:

1.	Unwired: Mounted in cell only

2.	Line side wired: Line side of each pole is wired to a branch circuit breaker

3.	Fully wired: Line side of each pole is wired to a branch circuit breaker, load side of each pole wired to a terminal block

Layout/Lead Time/Pricing:

Contact your nearest field sales office.

Shipping:

Integrated equipment line-ups are shipped as a factory-assembled, pre-wired system. Customers may specify single or multiple section shipping splits (some limitations apply).
In addition, lineups may be ordered with or without factory-installed power cables.

Square D > On-line Catalog > Products > Integrated Power and Control Solutions (IPaCS) Equipment > IPaCS Equipment: Modular Panelboard System and Integrated Power Center	Search