QMB and I-LinePanelboards - Pricing Procedure and Examples

QMB and I-Line® Panelboards

Pricing Procedure and Examples

Class 2110, 4620 / Refer to Catalog 2110CT9701, 4620CT9601

I-Line Merchandised Pricing Procedure

1.	Select the appropriate branch circuit breakers and accessories based on the required ampacity and AIR ratings from pages 9-23 through 9-30.

Determine the total mounting inches required by the branch circuit breakers. Pay close attention to the interior types and any branch mounting restrictions by referring to panel layouts on pages 9-20 and 9-21. i.e. Larger frame circuit breakers may mount in only one side of the panel due to physical sizes. Therefore, for larger size branches, you may only be able to consider one half of the total mounting inches available.

3.	Select proper main lug interior or main circuit breaker interior from page 9-20 or 9-21 based on the mains ampacity and branch requirements from step 2.

4.	Select blanks from the Accessories table on 9-22 as required to cover unused mounting space.

5.	Select appropriate box and front from 9-20 or 9-21 to accommodate panel interior selected in step 3.

6.	Apply appropriate discount schedule.

Table 9.80:

I-Line Merchandised Pricing Example: 600 Vac, 3Ø3W, 400 A, MLO, 14k AIR, Type 1 enclosure, 4 piece surface trim without door.

4 Piece Surface Trim Without Door

Total $ Price: 8153.30

I-Line Factory Assembled Pricing Procedure

1.	Select price for main lugs or main circuit breaker from Base Price tables on 9-31. Include solid neutral and ground bar when required.

2.	List branch circuit breakers and determine total mounting inches required. Include space only charge and mounting inches as required. Price branches from 9-32.

3.	If total space required exceeds the maximum listed, price as two or more panels and add price for sub-feed lugs, so installer can cable between sections.

4.	Add price for special features from 9-33.

5.	For complete price, total all prices. Order panel by description.

6.	Apply appropriate discount schedule.

Table 9.81:

I-LINE Factory Assembled Pricing Example: 600 Vac, 3Ø3W, 400 A, MLO, 14k AIR, Type 1 enclosure, 4 piece surface trim without door.

Total $ Price: 22278.

QMB Factory Assembled

QMB Panelboards — Method of Pricing

1.	Make a sketch with main lugs or main switch at the top or bottom.

2.	List required branch devices (switches and circuit breaker units). Include ampere rating, number of poles and unit mounting height from the appropriate table on pages 9-34 and 9-35.

3.	30–60 twin units are the same price as 600 V 60–60 twin units.

4.	30–100 and 60–100 twin units are the same price as 600 V 100–100 twin units.

5.	List solid neutral from 9-35 if required. No unit mounting height is required.

6.	List mains ampere rating, voltage, number of poles and unit mounting space from the appropriate table on 9-35.

7.	If total unit mounting height of branch devices exceeds maximum mounting space of the mains, price as two or more panelboards, adding sub-feed lugs or feed-thru lugs from the appropriate table on 9-35.

8.	Insert at the right of each item the price from the appropriate table, including any accessories. The sum will be the complete panelboard price including the cabinet.

9.	Specify H, R or J fuse clips.

Table 9.82:

QMB Factory Assembled Pricing Example 600 Vac, 3Ø3W, 400 A, Fusible 10k AIR, Type 1 Enclosure

Total $ Price: 6510.


Example pricing only	Discount Schedule

Square D > On-line Catalog > Products > Panelboards > QMB and I-LinePanelboards: Pricing Procedure and Examples	Search