Square D > On-line Catalog > Products > Operator Mechanisms and Disconnect Switches > Flange Mounted, Variable Depth Disconnect Switches: Accessories—Class 9422	Search

Digest 174 Quick Page Locator Enter a page number from our paper catalog to go directly to that page in our online catalog. Example: 5 - 3

Section - Page -

Disconnect Switches

Flange Mounted, Variable Depth Disconnect Switch Accessories

Class 9422 / Refer to Catalog 9420CT9701

Remote or Dual Adaptor Kit

For the remote or dual operation of 30, 60, 100 and 200 ampere disconnect switches, or GJL, FAL, FHL, KAL, KHL, LAL, LHL, Q4L, MAL, MHL, MEL and MXL circuit breakers.

Remote Operation—permits mounting the Class 9422 Type A9 or A10 handle mechanism at a lower level than the disconnect device it controls. This arrangement is often required where the disconnect device is mounted too high for personnel to easily reach a conventional operator.

Dual Operation—permits controlling two disconnect devices, one in line with and one remote from a single Class 9422 Type A9 or A10 handle mechanism.

Class 9422 Type A9 or A10 (page 8-17) handle and preferred mounting method must be used.

 

Table 8.77:

Disconnect Device

Disconnect Device	Enclosure Mounting Depth		Type	$ Price
	Min.	Max.
Disconnect Switch			D2	167.
30 A Type TCF/TCN	10.63	19.50
60 A Type TDF/TDN	10.63	19.50
100 A Type TEF/TEN	12.13	20.25
200 A Type TF	13.13	20.81
Circuit Breaker
GJL	10.50	19.50
FAL, FHL	10.66	19.50
KAL, KHL	11.13	19.50
LAL, LHL, Q4L	12.13	19.88
MAL, MHL,MEL, MXL	13.75	20.25

Table 8.78:

Air Valve Interlock

Note that Air Valve Interlocks will only accept specific three-way air valves manufactured by Parker listed in the table below.
Parker Valve Model Numbera		Class 9422 Air Valve Interlock
Air Valve Size	Knob Operated	Type	$ Price
.50 NPT 13	M04841885	G1	342.
	M08541848
.75 NPT 19	M04861885	G2	342.
	M08561848
1.00 NPT 25	M00080004	G1	342.

a	Prices do not include air valves or handle mechanism. For more information on air valves listed above contact Parker at C-PARKER@PARKER.COM, or call 1-800-272-7537.

Table 8.79:

Other Accessories

Accessory	Description	Class	Type	$ Price
Alternate Mounting Kit	Permits mounting Class 9422 Type A1 or A2 handle mechanisms in enclosures with flange thickness of 16 gauge to 0.5 inch.	9422	AM2	9.50
Channel/Flange Support Kit	Auxiliary kit recommended for use with 30 and 60 A disconnect switches and FAL, FCL, FHL, KAL KHL, NSF and NSJ circuit breaker mechanisms when these devices are to be mounted on the center channel of a multi-door enclosure or when extra rigidity for the flange is required. Supplied as standard with 100 and 200 A disconnect switches and LAL, LHL, Q4L, MAL, MHL, MEL and MXL circuit breaker mechanisms.	9422	C1	28.50
Auxiliary Lock Plate	Auxiliary kit recommended for use with the Class 9422 Type A-1 flange handle to facilitate padlocking the handle in the “OFF” position. Primarily used when the handle is mounted on the center channel of a multi-door enclosure. Also in any case where the enclosure doors interfere with the normal padlock slot in the flange handle. Meets both the Automotive and NFPA 79 specifications.	9422	L1	11.90
Special Lugs for Disconnect Switches	Copper Lugs Only—Specify Form Y157 Tin Plated Aluminum Lugs For 400 A Type TG Switch—Specify Form Y1572 (000–750 kcmil Cu/Al wire)	—	—	N/C
	Anderson Type VCEL Compression Lugs—Specify Form Y1574. Exceptions: All 30 and 60 A disconnect switches are not available with compression lugs.	—	—	N/C
Operating Rods	Standard operating rod for use with Class 9422 variable depth mechanisms. Included as standard in each kit	9422	R1	19.10
	Extra long operating rod for use with Class 9422 variable depth mechanisms. Can be used as a substitute for the standard rod included in each kit to increase the maximum mounting depth 7''. (Two are required for Types ARR, RR, ART, RT, ATE, TE, ATF, TF).	9422	R2	33.30

 

 

 

CP1	Discount Schedule