PowerLogic - Engineering Services

PMO Engineering Services provides a variety of factory assembled enclosures designed for a wide range of power monitoring and control applications. Professional workmanship and layout offer speed and flexibility during installation. Factory tested, pre-wired enclosures with well marked terminals help avoid wiring errors and needless troubleshooting during installation.

●	Assemblies include meters & devices wired to terminal blocks, disconnects and shorting blocks

●	Tailored to any system voltage :

■	120/208V, 277/480V & 347/600V Wye

■	240V, 480V & 600V Delta

■	Utilization of PT's required for higher voltage levels

●	Wall mountable and easy to install using concealed holes in the back of the enclosure.

●	Complete with necessary documentation and mounting hardware for quick and easy installation

●	Carbon steel construction, with industry standard ANSI 61 gray powder coat finish

●	Equipped with concealed hinged door, and universal pad-lockable latch.

●	Custom engraved nameplates available for all units.

Table 4.30:

Industrial Enclosure Types 12, & 4, UL & CUL 508A Listed

Available Meter Types

ION 7300, 7330 & 7350

●	Supports Single or Multiple Voltage Sources for Indoor (Type 12) & Outdoor (Type 4) applications

●	Available with 1 - 4 meters per panel. Serial & Ethernet Communications are options for all units

●	EGX & ION RTU Communication Enclosures with 1-4 devices per panel also available

Commercial Enclosure Type 1, UL & CUL 508A Listed

●	Available for the following meter types: PM210, PM710, PM820, and ION6200

●	Supports Single Voltage Source only for Indoor (Type 1) applications.

●	Available with 1 - 12 meters per panel. Serial Communications are standard for all units.

●	No Digital or Analog I/O is available for this option.

Industrial/Utility Socket Enclosure Type 3R, UL & CUL 508A Listed

●	Available for ION8600 only, with up to 3 Digital Inputs and 4 Digital Outputs

●	Supports Single Voltage Source only for Indoor & Outdoor (Type 3R) applications.

●	Units are Ring Type with removable cover.

●	Available with 1 meter per panel. Serial & Ethernet Communications options available.

●	Supports Form 9S, 35S, 36S, 39S and 76S configurations.

●	Options available for remote mounted CTs

●	Options available for integrated, bar type CTs

●	Optional Test Switch.

Additional engineered to order products are available for a wide variety of custom applications.

●	Touch Screen, PC & Server Cabinets

●	Generator Control Panels

●	PLC Controls & I/O Status Panels

●	Retrofit Mechanical Meter Draw Out Cradles with PM and ION Digital Meters

●	Communication & Gateway Panels

●	Switchgear Automatic Transfer Control Panels

●	Water, Air, Gas & Steam (WAGES) Panels

For additional information and pricing please contact your local PowerLogic sales specialist or PowerLogic Inside Sales Support at 1-866-466-7627. Enclosure pricing and literature available for download on our website at www.powerlogic.com/products/enclosures.

To better serve you please have the following information on hand when calling.

●	Enclosure type (Indoor or Outdoor) and Environment details (Corrosive or Non-Corrosive)

●	Power System Voltage Level and Type (Wye, Delta, or Single Phase)

●	Meter Type and Quantity or Device Type and Quantity per enclosure

●	Digital & Analog Input and Output requirements

●	Ethernet and Serial Communication Requirements

PowerLogic®

Engineering Services

Factory Assembled Enclosures

Commercial Enclosure Type 1, UL & CUL 508A Listed

Industrial/Utility Socket Enclosure Type 3R, UL & CUL 508A Listed

Additional engineered to order products are available for a wide variety of custom applications.

Square D > On-line Catalog > Products > Power Monitoring and Control > PowerLogic: Engineering Services	Search