Page 21-22

Square D > On-line Catalog > Products > Relays and Timers > General Purpose Plug-In Timers	Search

General Purpose Plug-In Timers

Class 9050-Type JCK

Class 9050 Type JCK timing relays are designed to provide low cost timing in a plug-in housing. The Types JCK11 thru 59 provide ±1% repeat accuracy. The Types JCK60 and 70 offer ±0.1% repeat accuracy. These timers are directly interchangeable with many other
8 and 11 pin tube base timers.

Up to ±0.1% repeat accuracy

Timing from .05 seconds to 999 hours

Available in 5 timing modes

DPDT contacts (2 N.O. and 2 N.C.)

10 A contact rating

Transient protected

Hold down spring available

Variable or fixed time delay

Horsepower rated

Variable Time Delay
Knob Adjustable Timing Range	On Delay	Price	Off Delay	Price	Off Delay Power Trigger	Price	Interval	Price	One Shot	Price	One Shot Power Trigger	Price	Repeat Cycle^a	Price
0.1–10 Seconds	JCK11^d	$52.	JCK21^d	$65.	JCK21PT^d	$65.	JCK31^d	$52.	JCK41^d	$65.	JCK41PT^d	$65.	JCK51^d	$93.
0.3–30 Seconds	JCK12^d	52.	JCK22^d	65.	JCK22PT^d	65.	JCK32^d	52.	JCK42^d	65.	JCK42PT^d	65.	JCK52^d	93.
0.6–60 Seconds	JCK13^d	52.	JCK23^d	65.	JCK23PT^d	65.	JCK33^d	52.	JCK43^d	65.	JCK43PT^d	65.	JCK53^d	93.
1.2–120 Seconds	JCK14^d	52.	JCK24^d	65.	JCK24PT^d	65.	JCK34^d	52.	JCK44^d	65.	JCK44PT^d	65.	JCK54^d	93.
1.8–180 Seconds	JCK15^d	52.	JCK25^d	65.	JCK25PT^d	65.	JCK35^d	52.	JCK45^d	65.	JCK45PT^d	65.	JCK55^d	93.
0.1–10 Minutes	JCK16^d	58.	JCK26^d	71.	JCK26PT^d	71.	JCK36^d	58.	JCK46^d	71.	JCK46PT^d	71.	JCK56^d	98.
0.3–30 Minutes	JCK17^d	58.	JCK27^d	71.	JCK27PT^d	71.	JCK37^d	58.	JCK47^d	71.	JCK47PT^d	71.	JCK57^d	98.
0.6–60 Minutes	JCK18^d	58.	JCK28^d	71.	JCK28PT^d	71.	JCK38^d	58.	JCK48^d	71.	JCK48PT^d	71.	JCK58^d	98.
1.2–120 Minutes	JCK19^d	58.	JCK29^d	71.	JCK29PT^d	71.	JCK39^d	58.	JCK49^d	71.	JCK49PT^d	71.	JCK59^d	98.

^aTwo dials are provided for independently adjustable repeat cycle timing ranges.

Fixed Time Delay
Timing Mode	Type	Timing Range (Seconds)	Price
On Delay	JCK1F(XXXX)^b ^d	0.1 to 180	$52.
On Delay	JCK1F(XXXX)^b ^d	181 to 3600	58.
Off Delay	JCK2F(XXXX)^b ^d	0.1 to 180	65.
Off Delay	JCK2F(XXXX)^b ^d	181 to 3600	71.
Off Delay with Power Trigger	JCK2F(XXXX)PT^b ^d	0.1 to 180	65.
Off Delay with Power Trigger	JCK2F(XXXX)PT^b ^d	181 to 3600	71.
Interval	JCK3F(XXXX)^b ^d	0.1 to 180	52.
Interval	JCK3F(XXXX)^b ^d	181 to 3600	58.
One Shot	JCK4F(XXXX)^b ^d	0.1 to 180	65.
One Shot	JCK4F(XXXX)^b ^d	181 to 3600	71.
One Shot with Power Trigger	JCK4F(XXXX)PT^b ^d	0.1 to 180	65.
One Shot with Power Trigger	JCK4F(XXXX)PT^b ^d	181 to 3600	71.
Repeat Cycle	JCK5F(XXXX)^b ^c ^d	0.1 to 180	93.
Repeat Cycle	JCK5F(XXXX)^b ^c ^d	181 to 3600	98.

^b(XXXX) denotes desired timing period in seconds. Example: Class 9050 Type JCK1F60 is an On Delay timer fixed at 60 seconds.

^cFixed repeat cycle timers can be supplied with the same or different On-Time and
Off-Time.

Class 8501 Sockets

(For sockets, see page 21-19; for DIN rail, see page 22-16. )

^dVoltage code must be specified to order this product. Refer to standard voltage codes listed below and insert as shown in How To Order.

Voltage Codes
Voltages	Code
12 Vac/Vdc	V36
24 Vac/Vdc	V14
48 Vac/Vdc	V17
120 Vac/110 Vdc	V20
240–50/60	V24

Contact Ratings
AC Volts	AC Amperes				Hp	DC Volts	DC Amperes
	Inductive 35% P.F.			Res. 75% P.F. Make Break and Continuous			Inductive		Res. Make Break and Continuous
	Make	Break	Continuous	Res. 75% P.F. Make Break and Continuous			Make	Break	Res. Make Break and Continuous
120	30	3	10	10	1/3	28	3	3	10
240	15	1.5	10	10	1/2	28	3	3	10

B300, R300, AC15 and DC13

Type JCK60

This On Delay timer uses a 5 position rotary switch to select the timing range. The three pushbutton thumbwheels are used to select the time value.


Timing Modes	Timing Ranges	Type	Price
On Delay	0.05 to 9.99 sec. 0.1 to 99.9 sec. 1 to 999 sec. 0.1 to 99.9 min. 1 to 999 min.	JCK60^d	$101.

Type JCK70

Two 5 position rotary switches are used to select the timing mode and timing range. The three pushbutton thumbwheels are used to select the time value.


Timing Modes	Timing Range	Type	Price
On Delay Off Delay Interval One Shot Repeat Cycle^e	Same as JCK60	JCK70^d	$115.

^eThe repeat cycle mode utilizes the same on-time
and off-time.

Class 8501 Hold Down Spring
For use on Class 9050 Type JCK Timers	Class	Type	Price Each
Hold down spring holds timer in socket during heavy vibration. (See 9050JCK with 8501NH7 photo at the top of this page.)	8501	NH7	$5.50

For additional information, reference Catalog #9050CT9601R7/04.


CP2		Discount Schedule

7/28/04

Square D US
Telemecanique US
Merlin Gerin US