Page 14-104

Download PDF

Square D > On-line Catalog > Products > NEMA/Definite Purpose Type Contactors and Starters > Separate Enclosures	Search

Separate Enclosures

NEMA Types 1, 4, and Oversize Class 9991

NEMAs 1, 4 and Oversized

The Class 9991 enclosures listed below accept an open type Class 8502 or 8536 Type S, NEMA Size 0, 1, 1P, or 2 contactor or starter along with a fused control circuit transformer (Form F4T) to allow field assembly of enclosed controllers. In the cover of the Class 9991 Type SCG1 enclosure, knock-outs are provided for field addition of Class 9999 cover-mounted control units. All other Class 8502 & 8536 enclosures include a panel with space and drilling for an open-type device and a fused control circuit transformer. In addition, three closing plates are included in each cover for easy installation of Class 9001 Type K or SK control units.

Oversized enclosures for open type Class 8903 Type L & LX, 20 A and Type S, 30 and 60 A electrically and mechanically held lighting contactors include a panel with space and drilling for an open- type contactor and fused control circuit transformer (Form F4T) and/or an auxiliary relay for use with single pole pilot devices (Form R6). When an auxiliary relay is required, use a Class 8501 Type XO11 relay. Three closing plates are provided as standard for easy installation of Class 9001 Type K or SK control units. Note: A Class 9991 Type SCG1 NEMA 1 separate enclosure can also be used for Class 8903 Type SMO, 30 A electrically held lighting contactor if Form F4T (control transformer), with or without cover control units is required.

For Use With				Class 9991 Enclosure						Recommended Class 9070c Transformer Selection					Fuse Block
Class	Type	NEMA Size or Ampere Rating	No. of Poles	General Purpose NEMA 1		Watertight and Dusttight Stainless Steel NEMA 4e		Dusttight and Driptight Industrial Use NEMA 12b		Standard		Extra Capacity
				Type	Price	Type	Price	Type	Price	Type	VA	100 VA	150 VA	300 VA
												Type	Type	Type
Magnetic Contactors and Starters
d 8502 & 8536	SAO, SBO & SCO	00, 0 & 1	1-3	SCG1	$180.	SCW4	$551.	SCA4	$323.	T50	50 VA	T100a	T150a	...	Class 9999 Type SFR4
			4-5							T100a	100 VA	...	T150a	...
	SDO	2	2-5	SDG4	305.	SDW4	992.	SDA4	470.	T100	100 VA	...	T150	T300
Lighting Contactors, Non-Combination
8903	LO, LXO	20 A	All	SDG3	$266.	SDW3	$779.	SDA3	$456.	T50	50 VA	...	...	...
										T50	50 VA	T100a	T150a	...
	SMOf	30 A	1-3							T100a	100 VA	...	T150a	...
			4-5							T100	100 VA	...	T150	T300
	SPOf	60 A	2-5

NEMA 12/3R Enclosures Modified for Outdoor Applications
(not to be used in salt air or corrosive environments)

Field Modifications for NEMA 3 dusttight, raintight and sleet resistant outdoor applications are as follows: Watertight conduit hubs or equivalent provision for watertight connection at the conduit entrance shall be used.

Field Modifications for NEMA 3R rainproof and sleet resistant outdoor applications are as follows:

1. Watertight conduit hubs or equivalent provision for watertight connection at the conduit entrance, when the conduit enters at a level higher than the lowest live part, shall be used.

2. Drain holes of ¹/8 inch diameter shall be added to the bottom of the enclosure.

Class 9001 Type K oiltight/watertight control units can be easily installed in NEMAs 4, 12, and oversized NEMA 1 separate enclosures provided with closing plates. When installing control units simply remove the closing plates and install the proper Class 9001 Type K components. Convenient control unit kits complete with assembled and pre-wired operators for quick installation are available as Class 9999 user modification kits. See table to the left for contents of each control unit kit. Class 9001 Type SK NEMA 4X corrosion resistant control units may be used as an alternate.